Key takeaways
- Specify material grades and brands in the BOQ.
- Check the cement manufacturing date and keep bags dry.
- Use TMT bars of the grade specified in the structural drawing.
- Check sand for silt and bricks for size and soundness.
Cement
OPC and PPC are both widely used. Your engineer may specify one for concrete and another for plaster or masonry. Check the manufacturing date on each bag, store bags off the ground on a dry platform, and use older stock first.
TMT steel
Use TMT bars of the grade specified in the structural drawing (for example Fe 500 or Fe 500D) from a reputable maker, with markings on the bar. Check diameters on delivery and keep steel off the ground to limit rusting.
Bricks and blocks
Good bricks are uniform in size and shape and give a clear ringing sound when struck together. Ask whether red bricks, fly-ash bricks or blocks suit your wall and budget, and soak clay bricks before laying.
Sand and aggregate
Sand with too much silt or clay weakens plaster and concrete. A simple jar test on site gives a quick indication. Aggregate should be clean and well graded.
Write it into the estimate
Ask your contractor to list the grade and brand of each material in the BOQ. See construction cost & BOQ.




